Type “Faisal Hills map” into a search bar and a pile of images comes back. Some look years old, a few are cropped halfway, and hardly any name the person who drew them. In fact, the trouble with the Faisal Master Plan isn’t finding it. The trouble is knowing which version you’re holding.
A master plan covers the whole scheme, while a block map covers one corner of it. Plot papers, meanwhile, go down to a single plot.
This guide goes through what public sources say about the location, the blocks, and the plot sizes. Where the evidence gets thin, I say so. Once you’ve read it, you should know what to check before you trust any map.
Faisal Hills Master Plan at a Glance
Here’s a quick table of what sources report and what stays open. I checked everything on 9 October 2026.
| Information | What the sources show |
| Project | Faisal Hills, a residential scheme with plots, commercial areas, and apartments |
| Master plan | A downloadable layout is advertised by a property guide; no date or revision is shown |
| Location | Main GT Road (N-5), Taxila region, Rawalpindi district, outside the Islamabad Capital Territory |
| Blocks | Reports vary: A, B, C, D, Prime Block, and Executive Block all appear |
| Plot sizes | Dealer-quoted and portal-listed; no official schedule found |
| Maps | Several versions circulate; none carries a verified date |
| Planning status | An RDA No Objection Certificate (NOC) for about 11,823.5 Kanal is reported |
| Research date | 9 October 2026 |
So treat the maps and sizes you meet online as leads to follow up. None of them settles anything alone.
What Is the Faisal Master Plan for Faisal Hills?
A master plan shows how a housing scheme fits together. You’ll see block boundaries, internal roads, residential and commercial areas, and spots set aside for parks and mosques. It also usually shows how the scheme links to the roads outside.
However, the Faisal Master Plan doesn’t work alone. Block maps sit beside it and fill in plot numbers and the streets around them, so you generally need both to pin down one plot.
A Faisal Hills Map also reflects a plan on paper. It tells you nothing about who owns a plot, whether possession has been handed over, or whether an authority signed off. Besides, an old copy may not match what’s actually built today.
The developer shows its own version on the Faisal Hills master plan page. Read that as the developer’s claim, and then set it against records that come from somewhere else.
Faisal Master Plan: Location and Main Access Routes
Where Is Faisal Hills Located?
A property portal’s area guide puts the scheme on the main GT Road (N-5) in the Taxila region. It also adds that the project sits outside the Islamabad Capital Territory and looks toward the Margalla Hills.
That sums up the Faisal Hills Location in broad strokes. The same guide quotes short drive times to nearby points, but those figures come from marketing copy, so I’ve left them out. For the developer’s view, see its own Faisal Hills location page.
Understanding the Faisal Hills Islamabad Map
Here’s a small oddity: the name says Islamabad, yet the scheme lies in the Rawalpindi district. As a result, a proper Faisal Hills Islamabad Map should show the GT Road setting on the Taxila side, not a point inside the capital.
Four kinds of document keep turning up. A location map shows the surrounding area, a master plan covers the entire project, a block map shows one section, and plot papers describe one plot. Since they answer different questions, mixing them up is where most confusion starts.
What Should Buyers Check About Access?
Start by asking which roads exist and which are only drawn. For example, one portal profile mentions a planned future link to the M-1 Motorway. A plan like that is an intention, and it isn’t a finished road.
Then go and drive the approach road yourself, or ask someone you trust to do it. Meanwhile, if a claim about access shows up only in an advert, leave it as unconfirmed.
Faisal Master Plan and Faisal Hills Map: How to Read the Layout
Once you know what each part of a map is telling you, reading it gets much easier.
Block Boundaries and Labels
Look at the title block and the legend first, because they ought to name the publisher and give a date. After that, trace the boundary lines to see where each block begins and ends.
A boundary with no date is hard to trust. Labels also drift between versions. In fact, the sources I read mention Block D, Prime Block, and Executive Block in different places, so check which names your own map uses.
Plot Numbers, Roads, and Junctions
Plot numbers help you find a plot, and the roads around it help you describe where it sits. For instance, one dealer listing for a Block A plot cites a 60-foot street. A property guide, however, says streets run from 40 feet up to 110 feet around that sector. Neither figure was measured, and both are reported.
Numbering may not follow one pattern across the scheme either. Therefore, a number that fits Block A could point somewhere else entirely in Block B.
Parks, Mosques, Commercial Areas, and Other Facilities
A symbol on a layout marks a facility that someone planned, but that doesn’t mean it’s open. It helps to sort each one into a group: marked on the plan, advertised by the developer, under construction, or confirmed as working.
The developer lists its offering in a post on facilities and amenities. Dealer adverts go further and mention cricket grounds, CCTV, and underground utilities. Still, until you’ve seen those things yourself, call each claim unconfirmed.
Faisal Master Plan: Block Layouts and Main Differences
The sources don’t agree on how many blocks there are. One portal guide says four, A to D. Another profile names Blocks A, B, C, and Executive, while dealer listings advertise a Prime Block as a newer section.
So I’ve covered the five areas that the developer’s site and recent listings name: Blocks A, B, C, D, and the Prime Block. No independent document I found explains how they relate to each other. Dealer text places the Prime Block near the main entrance off GT Road, beside Block A. Because that is dealer-quoted, confirm it on a real layout.
| Block | What public sources offer | Evidence status |
| Block A | 30 x 60 ft and 35 x 70 ft plots listed | Dealer-quoted |
| Block B | 25 x 50, 30 x 50, 35 x 70, 40 x 80 ft plots listed | Dealer-quoted |
| Block C | 5, 7, 8, and 10 Marla listed; one Kanal-size listing | Dealer-quoted |
| Block D | 5 Marla (25 x 50 ft) listed as a new booking | Dealer-quoted |
| Prime Block | 25 x 50, 35 x 70, 40 x 80, 50 x 90 ft listed | Dealer-quoted |
A Marla is a local land unit. In these listings, 5 Marla works out to 25 by 50 feet, or about 139 square yards.
Faisal Hills Block A Map and Main Features
Two dealer listings describe Block A plots. One offers an 8 Marla plot of 30 by 60 feet. The other offers 35 by 70 feet, close to 10.9 Marla, on a 60-foot street near what the seller calls the Main Civic Centre and Arch.
Both sellers list utilities like electricity, water, and sewerage. A third-party guide also says the block has a layout “clearly separated” for different plot sizes. However, all of this comes from individual adverts, so it can’t describe the whole block.
I couldn’t find a dated, independent Faisal Hills Block A Map. The developer publishes its own Block A page, and it’s worth comparing that with a signed layout before you rely on any boundary.
Property portals also say Block A ranks among the most searched blocks. That points to buyer interest, but it says nothing about quality or value.
Faisal Hills Block B Map and Layout Details
Block B listings are more varied. Sellers advertise 5, 8, 10, and 14 Marla plots, and specific adverts quote 25 by 50, 30 by 50, 35 by 70, and 40 by 80 feet. One says its plot sits near a park, and another says it faces the Margalla Hills.
Every one of those details comes from a seller, not from a map. In addition, one listing uses the term “NDC Open” and never explains it, so get a written answer before you assume what it means.
Again, no dated, independent Faisal Hills Block B Map turned up. The developer’s Block B page makes a sensible starting point.
After that, match the plot number to the block label. A cropped screenshot with only a number can’t tell you which block the plot belongs to, and that small gap causes real mix-ups.
Faisal Hills Block C: Plot Sizes and Layout
Plot Sizes in Block C
Block C listings show 5, 7, 8, and 10 Marla plots, and one seller offers a larger plot listed as a Kanal. An older listing for this block says the scheme offers 5, 7, 10, and 12 Marla, plus 1 and 2 Kanal. Since that text mentions a 2018 development plan, its sizes may be out of date.
| Plot category | Reported size | Source status |
| Residential | 5, 7, 8, 10 Marla; one larger Kanal-size listing | Dealer-quoted |
| Residential (older listing) | 5, 7, 10, 12 Marla, 1 and 2 Kanal | Older portal text |
| Commercial | Not found for this block | No public record |
How to Read the Block C Layout
A property profile calls Block C a luxury residential area, which is promotional wording. In the layout itself, look for plot numbers, bordering roads, and marked facilities. Meanwhile, the developer’s own Block C page gives its version of the layout.
What Buyers Should Confirm
Lay the map next to your plot file and transfer papers. Next, check the size and position, and then look for any gap between the paperwork and the ground. Of course, a plot on a map isn’t automatically for sale.
Faisal Hills Block D: Layout and Plot Information
Block D Location and Access
A forum discussion calls Block D a recent launch, and a property portal’s guide counts it among the scheme’s four blocks. However, I found no independent map showing its boundary, so I haven’t placed it on the layout.
Plot Sizes and Layout Features
Dealer listings advertise a 5 Marla plot of 25 by 50 feet as a new booking in Block D. The same seller lists 8, 10, and 14 Marla in a general price list, but that list covers the Prime Block too. As a result, it doesn’t prove those sizes exist in Block D.
So only the 5 Marla size has block-specific support, and it comes from a dealer.
How to Verify Block D Details
Ask for the Faisal Hills Block D layout and check it against the developer’s Block D page. Then confirm the block name, plot number, and size in your own papers. Seller adverts use phrases like “new booking,” so it’s also worth asking what the buyer actually receives: a plot, a file, or just a booking.
Faisal Hills Prime Block Map and Planning Details
Dealer listings describe the Prime Block as a newer section close to the main entrance off GT Road, beside Block A. They list plots of 25 by 50, 35 by 70, 40 by 80, and 50 by 90 feet, which correspond to 5, 10, 14 Marla, and 1 Kanal. Another listing also mentions 8 Marla and 2 Kanal.
The developer promotes this section heavily, including a post that calls it a “crown jewel.” Because that’s marketing language, I haven’t counted it as evidence. If you read the Prime Block post, keep that in mind.
I couldn’t find an independent, dated Faisal Hills Prime Block Map, so its exact position, road widths, and facilities stay unconfirmed. Begin with the developer’s Prime Block page. Also, don’t assume this section beats the others, because without documents that claim has nothing under it.
Faisal Master Plan: Plot Sizes by Block
This table pulls together the sizes I found in listings. It shows what sellers advertise, and an official schedule hasn’t confirmed any of it.
| Block | Plot size | Category | Evidence |
| Block A | 30 x 60 ft (8 Marla), 35 x 70 ft (about 10.9 Marla) | Residential | Dealer-quoted |
| Block B | 25 x 50, 30 x 50, 35 x 70, 40 x 80 ft | Residential | Dealer-quoted |
| Block C | 5, 7, 8, 10 Marla; larger Kanal-size listing | Residential | Dealer-quoted |
| Block D | 25 x 50 ft (5 Marla) | Residential | Dealer-quoted |
| Prime Block | 25 x 50, 35 x 70, 40 x 80, 50 x 90 ft | Residential | Dealer-quoted |
An older project page lists six sizes in square yards, from 139 up to 1,000. Since it carries no date, use it as background only.
A size list can’t tell you what’s in stock, who owns a plot, or whether possession has been given. The developer’s overview is in its Faisal Hills plots 2026 post. In the end, compare every figure with your own documents.
How to Verify the Faisal Master Plan Before Buying
Check the Map’s Source and Date
First, find out who published the map, and look for a date and a version number. If you’re holding two versions, work out which one covers your block. The developer’s own guide is in its post on location, NOC status, and master plan.
Match the Plot Number to the Correct Block
Check that the plot number, block label, and size all agree with each other. If one doesn’t fit, ask why before you pay anything. After all, a screenshot rarely carries enough detail to settle the question.
Check Relevant Approval and Ownership Records
A master plan isn’t an approval. Property sources report an RDA NOC covering about 11,823.5 Kanal for the project, yet that figure doesn’t say which blocks fall inside it. Therefore, ask the Rawalpindi Development Authority (RDA) to confirm whether your block is covered.
Ownership and transfer papers need checking through proper channels as well. The developer shares its view on its NOC page and in a verification guide, and both count as developer-stated material. A possession status update exists too, but compare it with dated site evidence.
Compare the Map with On-Ground Conditions
Visit the plot, or send someone you trust. Then walk the boundaries, look at the road, and measure the size. Above all, verify the plot and its papers, not just the general Faisal Master Plan.
Common Mistakes When Using Faisal Hills Maps
The most common slip is leaning on a map with no date. In that case, a wrong version can put a plot in the wrong place on paper, and you may not notice until after you’ve paid.
Some buyers treat a brochure as proof of approval, while others confuse a location map with a block map and then assume a planned park is already open. A few apply a size from one block to another, or take for granted that a marked plot is on offer.
These mistakes share a root: you end up trusting a document that can’t answer your question. Therefore, match every claim to the document that can actually support it, and most of the risk goes away.
Conclusion: What to Check Before Relying on the Faisal Master Plan
The master plan shows the layout, and block maps add detail. However, plot sizes and facilities need proof from reliable sources, and maps from different dates may disagree with each other.
So think of the Faisal Master Plan as a guide and not a guarantee. Compare the Faisal Hills Map with your plot papers and the RDA record, and then visit the plot. You can begin on the Faisal Hills home page or ask for documents through the contact page. Finally, the payment plan page helps when you compare costs with your paperwork.
Frequently Asked Questions About Faisal Hills Islamabad Master Plan 2026
Q1: What Does the Faisal Hills Master Plan Show?
Ans: It can show block boundaries, plot arrangements, roads, and marked facilities. However, the detail depends on the version and who published it.
Q2: Where Is Faisal Hills Located?
Ans: A property portal places it on GT Road (N-5) in the Taxila region, outside the Islamabad Capital Territory. Drive times in listings, though, are marketing claims.
Q3: How Can I Check the Faisal Hills Islamabad Map?
Ans: Look at the publisher and date first, and then work out what type of map it is. After that, compare the block details with your plot papers.
Q4: What Plot Sizes Are Available in Faisal Hills Block C?
Ans: Dealer listings show 5, 7, 8, and 10 Marla, plus one larger Kanal-size plot. Since no official schedule turned up, confirm current sizes with the seller.
Q5: How Can I Find the Faisal Hills Block D Map?
Ans: Ask the seller for a signed, dated block layout and check its labels and plot sizes against your papers. So far, only a 5 Marla size has block-specific support.
Q6: Where Can I Find the Faisal Hills Prime Block Map?
Ans: The developer’s site has a Prime Block page. Still, whatever you find, check the map’s date and block labels before you rely on it.
